Welcome to my Archtop Guitar Project Blog

The Archtop, or "Jazz Box", is a unique style of guitar. It has a complex design, and a sound that one might say can only come from such a design. Having never built a guitar of any kind before (unless you consider a ukulele to be a guitar) I have decided to jump right in up to the neck and start with the archtop. When I tell this to people, the normal response is something like, "have you ever built a guitar before?" or "so, you have a pretty good idea how to do this, right?". My usual reply is, "nope". I do, however, make a point to assure them that I have built many kinds of things, using many different materials, and I consider all constructions to have a logical and understandable process.

So, if you're interested in "newbe" projects like this, then grab a fresh cup of coffee or tea and follow along. The earliest post shows the design I'm going for.

**UPDATE TO INTRODUCTORY TEXT** You will see as the posts progress from earliest to newest that a few modifications and compromises have been made. As with all learning experiences, this project has allowed me to work out any problems with a design that have not been foreseen on paper. I also welcome any input from readers/followers who have some experience in either building or playing guitars that will point out potential problems.

Wednesday, May 30, 2012

Putting Things In Place

 Using some birch dowel around the inset for the neck overhang to provide both a clean edge and strength.

The hole in the bottom of the neck set was where I used a nut and bolt to compress the neck block into place on the underside of the guitar top while the glue dried. That hole won't matter when it's assembled, and it worked perfectly to keep the pressure and alignment right. Unfortunately, pictures of this process were lost when I put my trust in a cheap (read: free promotional item) USB stick.
Using some maple veneer on the undersides of the sound holes to prevent splitting of the laminated spruce strips of the top. Once glued in place I used a sharp blade to cut the holes open again, leaving only a maple rim around the underside of the sound holes. The one in the picture is extended downward to include the area where the holes for the knobs will be drilled as well.


Posted by at
Labels: , , , , , , , , , ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)